funforme3onDSI
admin
offline  |
| |
| posts: |
37 |
| joined: |
01/14/2011 |
| from: |
SAME BUT ON MY DSI, CT |
|
|
 |
|
|
| My Sketch-Up --- Gmax/3DS Max Working Convertion Methed Part #2 |
On the last tutorial I told you guys who are readin this how to do the basic, export file type, fixing the mesh, Vertices Welding, and Smoothing. Now this is part two on how to get your Google Sketch-Up Mesh into Trainz.
1. After the model is fixed by following the last tutorial,
Open the file you where using when you followed the steps on the last tutorial.
2. Look around your mesh/model, and if you see anything black sticking out or that isn't visible in some views then you must MUST!! delete all of them. This will take time.
3. Now click F3, you should see your model with tons of lines ( also none of the model should be filled in).
4. Now look at railings bars etc., and look for boxs or other meshes inside the main mesh. Delete them also.
5. Now I should have mentioned this before but if you see places where there isn't a peice of the mesh (A.K.A: you have a box with one side missing but if you look at it the other way you see it) In sketch-up select and right click on the part that was missing, click reverse face then export the model and that shoul be fixed.
|
|
|
|
|
|
Email To Friend | 
Set Alert To This Topic
New Topic | 
Post Reply 
posted on: 03/28/2011 08:33:42 PM
Edit
Quote
Report
Profile
Reply